Ordering the O.S. Extension Pack

 

 

Note: Communication with me is possible only in English.

Note: Please allow at least three working days for delivery of the software via Email.

Note: No delivery on weekends and public holidays.

 

 

1.      Payment

2.      Purchasing the software of the O.S. Extension Pack

3.      Purchasing only the help for *all* commands incorporated into the O.S.

4.      Bundle: Purchasing the software of the O.S. Extension Pack together
with the help for *all* commands incorporated into the O.S.

5.      Purchasing the software of Electrical Engineering

 

 

 

 

1.                    Payment

 

Several methods of payment are possible. PayPal payments (which allow Visa, MasterCard, American Express, and Discover), payments can be made through bank transfer from account to account or through cash on delivery (COD), if available. Also I accept checks (drawn on a German bank and in Euros) and money orders (in Euros). Upon receipt (and clearing, if necessary) of the check or money order your order will be processed.

Sales are not considered to be placed and are not final until I have personally approved them. If a sale is rejected payment will be refunded in full.

 

If you have any questions about placing an order, or if you have special needs, please email me.

mailto:Software49G@gmx.de

 

 

 

 

2.                    Purchasing the software of the O.S. Extension Pack

 

The O.S. Extension Pack is a downgraded version of the Multi Lingual Pack and contains only the English parts of it.
It is for those who do not want or need the other languages available. The O.S. Extension Pack can not be upgraded to a full Multi Lingual Pack.

 

The O.S. Extension Pack requires ROM 2.15 or higher and consists of

 

-     English messages (must be installed for taking over the operating system)

-     Fast and improved CAS help system

-     TreeBrowser / Formula Browser

-     TreeBrowserBuilder / Formula Builder

-     GUISLV / GUIMES

-     EQNLIB

-     Economic equations

 

 

         

 

 

Requirements:

A SD card (max. 2 GB) is needed for the installation and the internal serial number of the calculator must be provided while ordering the software.

 

Obtaining the internal serial number of the calculator:  

 

 

NOTE:

THIS IS *NOT*

THE SERIAL NUMBER

THAT IS ON THE BACK

OF THE CALCULATOR.

 

ENSURE THAT THE

NUMBER YOU PROVIDE

IS THE INTERNAL

SERIAL NUMBER AND

ENSURE THAT THE

INTERNAL SERIAL

NUMBER YOU PROVIDE

IS CORRECT !

 

 

Ensure that your HP 49G+ / HP 50G is operating in RPN mode.

 

          

 

To set the operating mode to RPN, press the [MODE] key and then the [CHOOS] menu key or the [+/-] key until RPN is set. Now leave the input form with [ENTER] or [OK].

 

Activate the ALPHA function of the keyboard by pressing the [ALPHA] key. (Depending on system flag -60 the key [ALPHA] must be pressed once or twice to key in characters continuously.)

 

          

 

Key in the following sequence while the ALPHA function of the keyboard is active: [2] [5] [6] [SPC] [A] [T] [T] [A] [C] [H] and then press the [ENTER] key on the keyboard. Then key in the following sequence while the ALPHA function of the keyboard is active: [S] [E] [R] [I] [A] [L] and then press the [ENTER] key on the keyboard.

 

 

Press the silver down arrow once and afterwards move the cursor to the very right using the silver right arrow. The silver arrows are located below the first row of the keys on the upper right side of the keyboard and are grouped together.

 

          

 

Your internal serial number (here CNA1234567 in this example) must be provided while ordering the software. The software you buy will only run on the machine you provided the internal serial number for, so ensure that the number you provide is correct.

 

After confirmation of the payment all necessary files will be mailed to you. Copy all files to a SD card while preserving the structure of the files and directories and then run the installation program.

 

 

Installing the software of the OSE:

 

Only use fresh batteries for the installation !

 

In RPN mode key in the following sequence then press [ENTER] and [EVAL] to start the installation.

 

          

 

In algebraic mode key in the following sequence then press [EVAL] to start the installation.

 

 

The installation program will guide you through the installation process.

 

 

Please use the software according to the documentation on the SD-card.

Note: It has been observed that under rare circumstances the SD card is not detected by the calculator and the installation program does not run. In this case simply restart the installation.

 

Use the OSE program to update / modify / delete the Multi Lingual Pack.

 

          

 

 

Price: € 12,22

The software will be delivered through email.

This is commercial software and is only licensed for use by a single user, tied to the calculator's internal serial number, but if you have to replace your calculator, a means is provided for transferring the license to the new calculator.

Note: You will need the SD card for updating the software.

 

Internal serial number:

By ordering the software you assure, that you have confirmed your internal serial number and you assure that the internal serial number you provide is correct.

By ordering the software you agree, that the software will be compiled to the internal serial number that will be transmitted together with your order. You also agree, that it is your responsibility to provide the correct internal serial number and you are aware of the fact, that the software will only work if you provide the correct internal serial number as described above.

 

 

 

 

3.                    Purchasing only the help for *all* commands incorporated into the O.S.

 

-     Help for 201 built-in CAS commands.

-     Help for 563 built-in non CAS commands.

-     Total help for 764 built-in commands.

-     Context sensitive help from the stack

-     "Hyperlinked" navigation to related commands.

-     Detailed access for every commands.

-     Supports all built in fonts.

-     Detailed description of the related flags used by the command / function.

-     Detailed description of all flags.

-     Detailed description of all keyboard shortcuts.

-     Detailed description of all reserved variables.

-     Detailed description of the Computer Algebra System.

 

 

         

 

 

Click here for more information about having the 'Full Command and Function Reference' inside your HP 50g.

 

Requirements:

A SD card (max. 2 GB) is needed for the installation and usage of the software and the internal serial number of the calculator must be provided while ordering the software.

See obtaining the internal serial number of the calculator.

 

 

Installing the software:

 

Only use fresh batteries for the installation !

 

Installation is done in two steps.

 

Step one: Installing the message library

 

Note: Skip step one if you have already installed the message library (Library 261) of the OSE / MLP.

 

In RPN mode key in the following sequence then press [ENTER] and [EVAL] to start the installation.

 

          

 

In algebraic mode key in the following sequence then press [EVAL] to start the installation.

 

 

The installation program will guide you through the installation process.

 

 

Please use the software according to the documentation on the SD-card.

Note: It has been observed that under rare circumstances the SD card is not detected by the calculator and the installation program does not run. In this case simply restart the installation.

 

Use the MSG program to update / modify / delete the help access library.

 

          

 

 

Step two: Installing the help

 

In RPN mode key in the following sequence then press [ENTER] and [EVAL] to start the installation.

 

          

 

In algebraic mode key in the following sequence then press [EVAL] to start the installation.

 

 

The installation program will guide you through the installation process.

 

 

Please use the software according to the documentation on the SD-card.

Note: It has been observed that under rare circumstances the SD card is not detected by the calculator and the installation program does not run. In this case simply restart the installation.

 

Use the HLI program to update / modify / delete the help access library.

 

          

 

 

Price: € 12,22

The software will be delivered through email.

This is commercial software and is only licensed for use by a single user, tied to the calculator's internal serial number, but if you have to replace your calculator, a means is provided for transferring the license to the new calculator.

Note: You will need the SD card for updating the software.

 

Internal serial number:

Note: The bundle is highly recommend giving you the most benefits for your HP 50g (see below).

Note: The speed of the help depends on the speed of the card ! So consider using a *fast* SD card for the help entries.

 

By ordering the software you assure, that you have confirmed your internal serial number and you assure that the internal serial number you provide is correct.

By ordering the software you agree, that the software will be compiled to the internal serial number that will be transmitted together with your order. You also agree, that it is your responsibility to provide the correct internal serial number and you are aware of the fact, that the software will only work if you provide the correct internal serial number as described above.

 

 

 

 

4.                    Bundle: Purchasing the software of the O.S. Extension Pack together
        with the help for *all* commands incorporated into the O.S.

 

Requirements:

A SD card (max. 2 GB) is needed for the installation and usage of the software and the internal serial number of the calculator must be provided while ordering the software.

See obtaining the internal serial number of the calculator.

 

 

Installing the software:

 

Only use fresh batteries for the installation !

 

Installation is done in two steps.

 

Step one: Installing the OSE

Step two: Installing the help

 

 

Price: € 18,88

The software will be delivered through email.

This is commercial software and is only licensed for use by a single user, tied to the calculator's internal serial number, but if you have to replace your calculator, a means is provided for transferring the license to the new calculator.

Note: You will need the SD card for updating the software.

 

Internal serial number:

Note: The bundle is highly recommend giving you the most benefits for your HP 50g.

Note: The speed of the help depends on the speed of the card !

So consider using a *fast* SD card for the help entries.

 

By ordering the software you assure, that you have confirmed your internal serial number and you assure that the internal serial number you provide is correct.

By ordering the software you agree, that the software will be compiled to the internal serial number that will be transmitted together with your order. You also agree, that it is your responsibility to provide the correct internal serial number and you are aware of the fact, that the software will only work if you provide the correct internal serial number as described above.

 

 

 

 

5.                    Purchasing the software of Electrical Engineering

 

Electrical Engineering contains over 500  Equations (including variable descriptions, units and pictures) covering the undergraduate curriculum for electrical engineers in most universities.

 

 

         

 

 

Requirements:

A SD card (max. 2 GB) is needed for the installation and the internal serial number of the calculator must be provided while ordering the software.

See obtaining the internal serial number of the calculator.

 

Note: Electrical Engineering requires an installed OSE (not included - must be purchased separately) or an installed MLP (not included - must be purchased separately).

Note: Electrical Engineering will only work with an installed OSE (not included - must be purchased separately) or an installed MLP (not included - must be purchased separately).

 

Installing the software of Electrical Engineering:

 

Only use fresh batteries for the installation !

 

In RPN mode key in the following sequence then press [ENTER] and [EVAL] to start the installation.

 

          

 

In algebraic mode key in the following sequence then press [EVAL] to start the installation.

 

 

The installation program will guide you through the installation process.

 

 

Note: It has been observed that under rare circumstances the SD card is not detected by the calculator and the installation program does not run. In this case simply restart the installation.

 

Use the EEI program to update / modify / delete the Electrical Engineering library.

 

          

 

 

Price: € 19,98

The software will be delivered through email.

This is commercial software and is only licensed for use by a single user, tied to the calculator's internal serial number, but if you have to replace your calculator, a means is provided for transferring the license to the new calculator.

Note: You will need the SD card for updating the software.

 

Internal serial number:

By ordering the software you assure, that you have confirmed your internal serial number and you assure that the internal serial number you provide is correct.

By ordering the software you are aware of the fact, that you need an installed O.S. Extension Pack or Multi Lingual Pack in order to use this software.

By ordering the software you agree, that the software will be compiled to the internal serial number that will be transmitted together with your order. You also agree, that it is your responsibility to provide the correct internal serial number and you are aware of the fact, that the software will only work if you provide the correct internal serial number as described above.